Polishing a Dull and Scratched Travertine Tabletop in Cheshire

One of my customers for who I recently polished their Marble floor was over the moon with the results and wondered and if I could achieve the same effect with a Travertine table which had many scratches to the top. The table was at his house in Heswall which is located on the Wirral, on the Eastern side of the Dee Estuary with lovely views across the river towards North Wales.

Travertine Tabletop Before Polishing Heswall Wirral

The table was a lovely piece of stone furniture, but I could see it was badly marked, scratched and had lost much of its surface sheen. Whilst this was a slightly unusual request, the polishing process works equally well on any type of stone so apart from the physical issue of working on a raised surface, I couldn’t see a problem with working on the table and anticipated that it would come up quite well. We agreed a cost and I arranged a time to come back and complete the job.

Travertine Tabletop Before Polishing Heswall Wirral

Cleaning and Polishing a Travertine Table

When polishing floor tiles, I would normally use large Tile Doctor 17-inch diamond encrusted burnishing pads fitted to a rotary floor buffer, naturally that simply wouldn’t work on a table however, I do have a small hand-held buffing machine that’s perfect for getting into small spaces and polishing stone wall tiles which would be perfect for this situation.

To restore the polished finish on the table I was able to use the hand buffer together with a set of four 6-inch diamond encrusted burnishing pads of different grits from coarse to very fine. The process involves working through the pads in sequence. I started the polishing with the coarse 400-grit pad and a little water, this coarse pad removes the scratches and ingrained dirt. The table was rinsed down and then the 800-grit medium pad was applied which is the first step in the polishing process. Again, this pad is applied with water to lubricate and the table was rinsed down afterwards. The process was repeated with the 1500-grit fine pad and then the 3000-grit very fine pad to bring up a really nice shine to the Travertine table, I should mention the last pad is applied dry with only a tiny amount of water sprayed onto the surface.

Sealing a Travertine Table

The last step was to seal the stone to protect it going forward for which I used two coats of Tile Doctor Colour Grow. The sealer is rubbed into the top then the excess polished off after ten minutes. Once the sealer was dry the table surface was then buffed with a white pad to bring up the finish even further.

Travertine Tabletop After Polishing Heswall Wirral

The client was really pleased with the result, the table looked like new; he was so glad he had asked me to look at it following the work on his floors. Before leaving I talked to him about the best way to look after his table in the future and recommended for regular cleaning that he use Tile Doctor Stone Patina Spray which has been especially formulated for the regular cleaning of stone worktops.

Travertine Tabletop After Polishing Heswall Wirral

 

Source: Travertine Tabletop Cleaning, Polishing and Sealing Service in Cheshire

Polishing and Sealing Marble Night Club Bar Top

Revolucion de Cuba is one of the biggest and busiest bars in Manchester. With the sheer amount of customers that visit the bar, the Marble counter top had become very worn and dull.

Stains and spillages are inevitable in an environment like this, but this can cause long lasting damage to the sensitive natural stone if proper maintenance is not provided. The bar owners hold very high standards for the appearance of the venue and as such were keen to get the Marble bar top back to looking its best. They called the Derbyshire Tile Doctor and I was more than happy to see what I could do.

Revolucion De Cuba Bar Top Before Polishing Manchester Revolucion De Cuba Bar Top Before Manchester

Burnishing a Marble Bar Top

When it comes to restoring high-end polished stone surfaces, such as Marble and Limestone, we usually opt to use the process known as burnishing. Which involves the use of several different grades of diamond encrusted pads to remove dirt and stains, as well as gradually restoring a smooth and aesthetically pleasing polish to the stone. In our system we use four pads, ranging from Coarse to Very fine grit pads.

I started with 400 grit six-inch Coarse pad on the bar top fitted to a hand buffer with some water added for lubrication, this action removed the old sealer, stains and scratches on the surface. Before moving on to the next pad I made sure to rinse the bar top and then removed the slurry with a wet vacuum. This process was then repeated with the 800 grit Medium pad before moving on to the 1500 grit Fine pad to begin to smooth down the surface ready for the final polishing. This was a long section of Marble so the whole process took some time as you can imagine.

Revolucion De Cuba Bar Top During Polishing Manchester Revolucion De Cuba Bar Top Before Manchester

After finishing with the third pad I carefully filled the visible cracks and holes in the stone using epoxy resin mixed with marble powder, before leaving to dry completely overnight. The next day I returned to the venue and went over the bar top with the final of the four pads, the 3000 grit Very Fine pad (this time without water as lubrication) to achieve the final polish.

Revolucion De Cuba Bar Top After Polishing Manchester Revolucion De Cuba Bar Top After Polishing Manchester

Sealing a Marble Bar Top

After completing the polishing process, I began sealing the Marble. I opted to use Tile Doctor Ultra Seal, which is a premium natural-look penetrating sealer formulated to provide maximum stain protection, making it ideal for use on natural stone bar tops and kitchen counters.

Revolucion De Cuba Bar Top After Polishing Manchester

It’s really important to polish off all the excess sealer that doesn’t penetrate into the stone, and to do this I used the Tile Doctor three cloth system. Once the fresh sealer had been applied, I went over the surface once more with the 3000 grit pad to leave an extra smooth and shiny finish.

Revolucion De Cuba Bar Top Before and After Manchester

The bar owners were very pleased with the work, opting to take up our maintenance plan program to ensure this great Marble bar top continues to look as good as it does now in the future!
 
 
Source: Marble Tile and Stone Cleaning and Sealing Service in Derbyshire

Limestone Table Restoration in Edinburgh

Here is a Limestone table that we stripped, cleaned and sealed in Edinburgh city centre. As you can see from the photographs below the old sealer/wax coating had started to deteriorate and wear off in places leaving the table looking dirty and the client hated the waxy/yellow shine finish it left so asked us to remove the old seal completely and make the Limestone look completely natural.

Limestone Table Before Refinishing Edinburgh City

Cleaning a Limestone Table Top

To remove the remaining wax coating the table was smothered in strong solution of Tile Doctor Pro-Clean which is an effective cleaning product that will strip off old sealers when used in a concentrated form. The solution was left to dwell for a while before being scrubbed in by hand and then rinsed off with water.

To make the job easier the table was cleaned in two sections and the process repeated a number of times in order to remove all the wax. Once complete the table was given a final clean using Tile Doctor Neutral Clean which is a PH neutral cleaning product to remove any trace of Pro-Clean and neutralise the stone before sealing.

Limestone Table During Refinishing Edinburgh City

Sealing a Limestone Table Top

The table was dried thoroughly before being sealed using three coats of Tile Doctor Colour Grow which is a penetrating sealer that soaks into the pores of the stone improving its natural colours and protecting it against staining from within.

Limestone Table After Refinishing Edinburgh City

The difference was remarkable and my client was delighted with the result.
 
 
Source: Stone Restoration Services in Edinburgh

Polishing a Travertine Table

Here’s a quick job I did at a house in the town of Preston, located on the north bank of the River Ribble. My customer had a Travertine table top that had become dull and lost its shine however being a polished stone I knew it should be possible to burnish the shine back.

Travertine is very popular for both commercial and residential use, as it is a natural material with unique features and characters that distinguish it from other types of stone. It can be used for floor tile, kitchen flooring, bathroom wall tile, patios and, in like in this case, table tops.

Travertine Table Top Before Restoration Preston

Burnishing a Travertine table top

My first main task was to restore a nice polished finish to the table top. I did this using a system of four small six inch Tile Doctor Diamond encrusted burnishing pads. The pads come in different grits and attached to a small hand held buffing machine are used in turn with a little water starting with a Coarse grit before moving on to pads with Medium, Fine and Very Fine grits. Despite being quite a physical task, the impact the process of burnishing can have on a dull surface in a short space of time is incredible (as the photos show).

Travertine Table Top During Restoration Preston

Sealing a Travertine table top

After completing the burnishing, the second half of the job centred on sealing the newly polished table top. This was done using one coat of Tile Doctor Ultra-Seal, which is a solvent-based, penetrating sealer specially designed to provide maximum protection against dirt and stains.

Ultra-Seal is particularly useful for sealing table tops in kitchens upon which food is prepared and served. It also accentuates the natural look of the Travertine while allowing the stone to breathe moisture. The product is suitable for use on most types of natural stone, including Marble, Granite, Slate, Travertine, Limestone, and more.

Travertine Table Top After Restoration Preston

 
 
Source: Professional Tile, Stone and Grout cleaning and polishing services in Lancashire

Putting the shine back on a Marble kitchen worktop in Prestbury

This beautiful Marble kitchen worktop has been installed in a house in the village of Prestbury some years earlier and was now looking rather dull and spoiled by wine glass marks. The polish can be restored on these worktops in a similar way to that of a Marble floor the only difference being you have to use smaller more manageable burnishing pads.

Marble kitchen worktop Prestbury before

Polishing a Marble Table Top

After protecting the floor with sheets I proceeded to re-polish the Marble worktop with a set of six inch burnishing pads fitted to a hand held machine. Similar to floor burnishing you start with a coarse pad to remove scratches and ingrained dirt lubricated with a little water and then move onto the polishing pads from Medium, Fine through to Super Fine. You need to wash down the Marble in-between each pad as the water does become soiled from the burnishing process.

Marble kitchen worktop Prestbury after
For the regular maintenance of Marble and Granite worktops we recommend the use of Tile Doctor Stone Patina spray which helps build up lustre on the stone as well as cleaning it.
 
 
Source: Stained Marble Table Top re-polished